Paramount Plastics Stealth 2.0 Rear Fender for the Polaris Slingshot

(7 reviews) In Stock
  • $599.89
    $489.99 Discounted Price
  •   Login & Earn 490 Points with this item
  • Part Number: paramount-plastics-stealth-2-fender

Available Options


Manufacturer:
Paramount Plastics

Width:
Supports up to a 305 Series Tire

Color:
Black

Hardware Included:
Yes

Made In:
USA

Material:
Plastic


Polaris Slingshot Application Guide:

» 2015 Polaris Slingshot Base / SL / SL LE
» 2016 Polaris Slingshot Base / SL / SL LE
» 2017 Polaris Slingshot Base / SL / SL LE / SLR
» 2018 Polaris Slingshot GT LE / S / SL / SLR / SLR LE

Polaris Slingshot Rear Fender by Paramount Plastics
Paramount Plastics has stepped up their game to develop what we think is the nicest looking rear fender available for the Polaris Slingshot so far. The Stealth 2.0 rear fender is 100% bolt-on, utilizing factory bolt holes already on the Slingshot. We offer an optional "air foil" and "plug n play rear led strip" that extends off the factory license plate light harness. We highly recommend these optional accessories as we feel the fender looks a bit plain without them. The new 2.0 Fender fits up to a 305 series rear tire making it compatible with all current factory slingshot rear tires including the SLR models.


Bullets
Width Supports up to a 305 Series Tire
Product Details
Color Black
Hardware Included Yes
Made In USA
Material Plastic
Will this rear fender work on the 2016.5 slingshot? ( Sam, 12/17/2017 9:32 am )
Hello Sam, yes it will. Please let us know if you need further assistance. ( SlingMods )

Ask a question

Note: HTML is not translated!
Total Reviews: 7
Average Rating: 4.71

06/30/2018 1:31 pm

rear fender stealth 2.0
looks and works great , glad i made the purchase , and cheaper than any other rear fender i could find


06/12/2018 4:26 pm

Stealth 2.0 rear fender
1/4 inch off center (towards driver side), will slot clearance holes to improve alignment


05/30/2018 6:59 am

I like it!
I really like the fender overall. It looks good, performs well, and the additional running light is a plus for safety and looks. The bad: The instructions are junk. When you install the fender put only the left bolt (as seen from the rear) in to hang the fender on and then screw in the remaining two normally. If you don’t take the wheel off during installation place a towel over the tire so you don’t get dirty. 7 feet of wire? You only need a couple of inches and the rest needs to be secured. It would have been nice to have the plastic the same texture as the back of the slingshot. My gripes seem like a lot but are really only nit-picking and none of them were deal breakers for me. Nobody is really going to notice the texture difference unless they are right up on the machine, and the LED strip while not aesthetically pleasing when the machine is off, looks great when the machine is running. If you want a fender get this and get all the parts, you will like it.


05/22/2018 11:43 am

Fender & extras
This fender with the extras is perfect for the machine. Looks like it belongs there. Reasonably easy to install, to save much frustration jack it up, put some stands under there and remove the rear wheel.


04/23/2018 9:41 am

This fender compliments the Slingshot style nicely
When I saw this fender I thought it complimented the looks of the Slingshot well. Installing wasn't too bad but I did run into a glitch that took some time to work out. I opted for the optional top air foil, When installing that part, once the first original torx bolt was tightened, the two side holes would not line up with the existing bolt holes. It wasn't off by much but enough that the fender just would not go on and the one bolt that would almost go in wanted to cross-thread. I had to dremel out the air foil's two side holes to allow the original bolts to line up. Without that glitch this would have been a 30-45 minute install. Note: you will need to take your exiting plate holder apart and discard the screw caps. You will also need two types of torx tools... you can take the original plate holder off with a long torx tool but you need a much shorter one to install the fender in the same holes. Now that it's all done, it looks great and I've already gotten compliments.

Write a review

Please login or register to review
Please login or register to upload photos!



Related Products

Assault Industries Rear Fender for the Polaris Slingshot

Assault Industries Rear Fender for the Polaris Slingshot

Finish off the rear end of your Polaris Slingshot with a rear fender by Assault Industries..

40 Review(s)

$495.95

Metricks "Bolt-On" Rear Hugger Fender Kit for the Polaris Slingshot (Ver 2.0)

Metricks "Bolt-On" Rear Hugger Fender Kit for the Polaris Slingshot (Ver 2.0)

Finish the rear end of your Polaris Slingshot with a stylish rear hugger fender by Metricks..

13 Review(s)

$699.00 $790.00

Metricks Mini Sweep "Bolt On" Rear Fender Kit for the Polaris Slingshot (Ver 2.0)

Metricks Mini Sweep "Bolt On" Rear Fender Kit for the Polaris Slingshot (Ver 2.0)

Add Style and Functionality to the rear end of your Slingshot with the Mini Sweep Rear Fender Kit by..

6 Review(s)

$441.00 $490.00

Paramount Plastics Air Foil for the Stealth 2.0 Rear Fender

Paramount Plastics Air Foil for the Stealth 2.0 Rear Fender

Add looks to your Paramount Plastics Rear Render with this Optional Air Foil..

7 Review(s)

$49.95

Paramount Plastics LED Running Light Strip for the Stealth 2.0 Rear Fender

Paramount Plastics LED Running Light Strip for the Stealth 2.0 Rear Fender

Optional Plug and Play LED Running Light Strip for the Stealth 2.0 Rear Fender..

7 Review(s)

$29.95

Metricks "Bolt-On" SLR Series Rear Hugger Fender for the Polaris Slingshot

Metricks "Bolt-On" SLR Series Rear Hugger Fender for the Polaris Slingshot

Add this customer SLR Series Hugger Rear Fender for your Polaris Slingshot by Metricks..

$699.00 $790.00