Upload your photos
EZ Flow Oil Drain Valve for the Polaris Slingshot (2015-19)
-
$29.95$23.95 YOU SAVE $6.00
| 2015 | Slingshot Base / SL / SL LE |
| 2016 | Slingshot Base / SL / SL LE |
| 2017 | Slingshot Base / SL / SL LE / SLR |
| 2018 | Slingshot GT LE / S / SL / SLR / SLR LE |
| 2019 | Slingshot GT / S / SL / SLR |
Polaris Slingshot EZ Flow Engine Oil Drain Valve
Replaces your standard Polaris Slingshot oil drain plug, making oil changes easier, and saving valuable time and expenses. Lift the lever of this nickel-plated brass ball valve and give it a quarter turn to open it "with your finger". Return the lever to its original position and it locks closed.
Most Frequently asked Q&A about EZ Flow Drain Valves
Q. Will my EZ Oil Drain Valve Leak?
A. No. The EZ Oil Drain Valve incorporates the “ball valve” design of valves used in pressurized gas applications and will not leak. Every single valve is constructed under precise specifications and pressure tested, ensuring a perfect seal upon factory approval. The EZ Oil Drain Valve is produced in an ISO-9001-certified factory.
Q. Will my EZ Oil Drain Valve open up on the road?
A. No. When installed, the EZ Oil Drain Valve only extends about 1/2" from the oil pan more than a stock oil drain plug in its closed position. The valve's effective locking system requires a double-action mechanism to open it, preventing any accidental openings. Unlike spring-loaded gate valves, the heavy-duty ball valve construction will withstand any engine vibration.
Q. How long will my EZ Oil Drain Valve Last?
A. Your EZ Oil Drain Valve is constructed out of corrosion-resistant forged brass, stainless steel, and nickel-plated for added protection from the elements. Brass is the ideal material as it can withstand temperature extremes as well as harsh environmental factors. (I.e. salt, water, oil, chemicals, etc.) Your EZ Oil Drain Valve will outlast your engine.
Q. How do I install and use my EZ Oil Drain Valve?
A. Installation is easy. Simply follow the instructions below.
- Remove the drain plug and drain oil.
- Hand install the valve until tight, and give 1/8 turn with a small crescent wrench on the body. DO NOT OVER-TIGHTEN!
- Close the lever and refill with engine oil.
When it’s time for an oil change, using your EZ Oil Drain Valve is simple.
- Lift up the lever and turn counter-clockwise.
- Turn back the lever to close.
- Make sure the lever is secured in the locked position.
| Bullets | |
| Compatibility | Synthetic or Conventional Oils |
| Product Details | |
| Material | Brass / Nickel Plated |
