Adjustable Bolt-On Highway Foot Pegs for the Can-Am Ryker (Set of 2)

Functional. Adequate for the price.

I had an extension on my reverse lever to allow more leverage to shift it into reverse. I had to remove the extension to allow my feet to sit on the these footpegs. I have a 2022 Rally and in my case on the left side the hard line brake line was zipped tied to the frame in a couple places and I had to remove those zip ties to install the bracket. That is not mentioned in the installation video and no zip ties are provided to zip tie that back when done.

Do not work well with installed jockey shifter or ShowChrome floorboards. Jockey shifter is in the way of putting your left leg onto the peg. The right side is in the way of getting your foot on the brake pedal. When I tried to move the brake pedal to a higher location it interfered with the floor board bracket and caused the brake light to stay on. Plus installation required removal of floor boards which isn't addressed in the install video.

You are not going to be happy with the left side peg if you have the Jockey Shifter from Slingmods. I had to make major modifications to the shifter to get it out of the way. Involved heating and bending as well as welding a 3" extension in the shift rod and bending it as well. I am very happy with the end product but it took a lot of time. Also, you can't reinstall the lower plastic panels as shown in the video if you have the floorboards. I actually removed the right side floorboard to the the plastic reinstalled but was able to just rotate the floorboard down on the left side. Haven't ridden yet with the highway pegs but have enough time on the bike to know they are going to be a welcome addition. Most of our weekend rides are 160-200 miles, and the knees get pretty tired of one position over that distance. Despite the difficulties and 4 hours of install, they look like a good product.

Highwaypegs
Easy to install. Takes a little bit of time but the video is helpful.