TricBeamz LED Fog Light Kit for the Polaris Slingshot (2020-2024) (Gen 2)

not worth the money ...
the install wasnt hard but it could have been made easier if the left and right sides were stamped. The lights themselves can not be adjusted straight forward because the brackets dont have enough adjustment in them. That said the lights tend to point out towards the side of the road and not center. The height adjustment is also limited. I think for the money you would be better off with a light bar. The install looks good but thats about it. I am disappointed. I added a few pics so you can see the front and rear to see everything I have mentioned.. The lights do not sit centered and there is no more adjustment to line them up where they need to be. The product could have been designed better for the price.

Tricled, Best Company & Customer Service
I have all the tricled options on my 23R and all the products are great. It takes some time to adjust the brackets but the tric products & customer service are worth it.

very bright
NIce lights. The switch is cheap as heck. Mounting location is kinda junk. an illuminated switch would have been nice for the money. Directions are POOR no marking on the L+R brackets. Trial and error got me threw.

Brackets need work
Seem to be good guality and bright lights and the brackets are marked left and right now but the brackets aren't close to what they need to be for install. These lights aren't gonna sit flush due to the outward curve of the slingshots panel so these brackets should curve inward to accommodate but it's a simple all same size side pieces and like all the other reviews say they're next to impossible to adjust perfect. Took a while until I bent the brackets to point inward. I'm a licensed Auto, Motorcycle and watercraft dealer so I've done alot of fog lights over the yrs. Hopefully tric goes back to the drawing board with the mounting brackets.

2021 SL Installed
Installed these in a short period of time (about 1.5 hours) and powered it with my Neutrino fuse block. Once installed, I had to have two 'adjustment sessions' on the brackets. To adjust, you have to remove the lights (2 minutes) and then adjust the bracket's nuts/bolts. Each adjustment took about 20 minutes. You HAVE to be a bit patient but with some work you will get the right angle of the beam. You also might have to swap the sides as one bracket is made for the left and the other is made for the right side. I have ridden about 200 night miles on them and they have not moved from the final adjusted angle. I like to ride on dark back roads- so for me, these lights were a must! Very happy with the performance and support from Reggy at tricled.