TricLED Dual Headlight Canadian Conversion Kit for the Polaris Slingshot (Pair) (2017-19)

(11 reviews) In Stock
  • $419.95
    $375.00 Discounted Price
  •   Login & Earn 375 Points with this item
  • Part Name: 2017-slingshot-canadian-headlight-conversion-kit
  • Part Number: SM-2162

Available Options


Manufacturer:
TricLED

Bulb Size:
Halogen H3 & T10 (included)

Plug 'n' Play:
Yes

Warranty:
MFG 1 Year


Application Guide:

» 2017 Base / SL / SL LE / SLR
» 2018 GT LE / S / SL / SLR / SLR LE
» 2019 GT / S / SL / SLR

2017-19 Polaris Slingshot Canadian Headlight Conversion Kit
Polaris threw us for a curve ball and changed up the plastic headlight shrouds on the 2017 model Slingshot. We had to go back to square one on this kit and completely redesign the Canadian Conversion kit for the newer model Slingshots. This kit includes two new plastic shrouds, aluminum mounting plate for the new headlights and of course (2) new OE Style front headlights. You'll have the option to run either (yellowish) halogen bulbs or (bright white) LED bulbs with this kit depending on what look you're going for. If you opt for the (bright white) LED upgrade option, we'll also include (2) bright white T10 bulbs so that both your running lights and brights will match on their color output.



Product Details
Bulb Size Halogen H3 & T10 (included)
Plug 'n' Play Yes
Warranty MFG 1 Year
Got the upgraded shroud and 1set of H3 LED headlights and 1SET (2 bulbs) T10 bright white $474.00. Where do I place these T10 bright whites ?? Are they simple pull a bukb and replace ? ( Bruce Amory, 03/26/2018 7:03 am )

Hello Bruce, yes the T10 LED replacements are plug and play and are located under the H3 Light Housing. Below is a picture for reference. Simple wiggle the factory T10 silicone boot out and replace the incandescent bulb with the T10 LED bulb and you're done. Be sure you don't pull on the wires though when removing. Thanks for the inquiry.

( SlingMods )
After reading the reviews I'm a little confused on the brightness of the Canadian lights vs. the stock lights when installing the conversion. All of the pictures I've seen makes the Canadian lights look just as bright (day or night) as the stock lights. I read one of the reviews about this issue so here's my question:
Is there an adapter to turn the Canadian lights (if they are DRL) to low beam lights or is it simply a wiring issue during installation?
If it's a wiring issue, do I need to call for re-wiring instructions when ordering?
( Leroy Dancy, 09/07/2017 2:40 pm )

Hello Leroy, here are the instructions on how to increase the brightness of the "canadian conversion" lights to match the brightness level of the standard "outside headlights".

https://www.slingmods.com/pdf/canada-conversion-wiring-swap.pdf

We only recommend running the "Canada Headlights" at full brightness if you swap out your stock halogen bulbs to our LED bulbs. The reason for this is that the stock halogen bulbs draw too much current to run 6 headlights and can blow the headlight fuse. The LED bulbs pull substantially less current and will allow for the Canadian Headlights to be run at full brightness with the wire swap info included in the .pdf link above! Let us know if you need additional assistance.

Thanks!


( SlingMods )

Ask a question

Note: HTML is not translated!
Total Reviews: 11
Average Rating: 4.82

07/10/2018 9:42 pm

TricLED
nice blueish white light and much brighter at night


07/03/2018 6:33 am


love the extra light looks great


06/18/2018 5:48 pm

Easy install
The install was relatively simple and the lights look great!


03/28/2018 8:21 pm

Dual Headlight Canadian Conversion Kit
Really like the new look! It was well worth the time and money. Only experienced one snag during installation. It seems the plastic shroud is a bit wider than my 2017 SLR headlight setup which caused the inner most bolt hole to be off center by about a 1/4 inch. This made it nearly impossible to get the T40 bolt back in without cross threading the bolt. Only other way to get the holes to align is to bend the shroud a bit to get a forced alignment which I do not recommend doing. After some time trying to work it, I decided to just zip tie it since the inner most hole isn't visible in the least when the hood is fully closed. Problem solved! For those who may not know, the default settings once installed is that the inside H3 bulb doesn't come on unless high beams are activated. I wanted all six lights to come on while in low beam...still working through this to get it set up right.


01/29/2018 2:31 pm

Great add on....
...Must have item for me as i ride more in the evenings...great Quality item, easy install

Write a review

Please login or register to review
Please login or register to upload photos!

Prop 65 Notice


Prop65 WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov


Related Products

LED Headlight Conversion Kit for the Polaris Slingshot

LED Headlight Conversion Kit for the Polaris Slingshot

Transform your ordinary headlights into LED headlights with our Polaris Slingshot headlight conversi..

84 Review(s)

$174.00 $199.00

HD Elite LED Headlight Conversion Kit for the Polaris Slingshot

HD Elite LED Headlight Conversion Kit for the Polaris Slingshot

Enjoy our new HD Elite LED Headlight Conversion Kit for your Polaris Slingshot. It's the brightest L..

10 Review(s)

$214.95 $239.90