Total Reviews: 29
Average Rating: 4.34

04/13/2018 3:00 pm

PRP seat covers
I highly recommend this product it was worth the wait. You will definitely need to remove the seats to properly install the seat bottoms there is no way to tie the fastening strings otherwise. The seat backs were a breeze to install also I recommend leaving the seat covers in the sun for a while before installing this will make it easier to install.

04/05/2018 3:25 pm

PRB seatcovers
Look great. Good color options. Seat backs are easy but ended up pulling both seats to properly install the lower seat covers. Top half seat back, was simple. Bottom cover had 4 strings on each with no idea what to do with them. NO INSTRUCTIONS. Google and utube to the rescue. There are strings slots on the seat base. Pull seat back (4 bolts). On drivers side, pull 4 bolts, disconnect seat belt harness, pull out seat. Install cover and figure out how you want to attach the nylons cords. Passenger side, seat has poor deign. Frame is directly in front of right rear bolt. Goes in sideways. You must pull the other 3, loosen bolt 1/4 turn at a time and let it push the seat inboard. Then seat can be removed. Bolt can not come out of the bracket because of the frame. Install, put that bolt in first. Get it started and as you tighten it will pull the seat outboard. Then put in other 3 bolts. Very pleased with the look.

04/02/2018 7:18 am

Very Impressed
I was thoroughly impressed with the seat covers. The wait is a little long (4 weeks) but it was well worth it. The interactive design on the internet gave you a first look at what the seat would look like and that is what sold me.

03/26/2018 9:18 am

Seat covers look great and fit well.
Finished install. No instructions. Searched internet. Found parts of instructions on seat change out. Ended up pulling both seats. Drivers side easy, 4 bolts, one plug. Passenger side not so. Four bolts, except one bolt head is directly across from frame. No access. Had to pull 3, then then the 4th one (outb rear) 1/4 turn at a time and let it push the seat inbd. Bolt cannot be removed from its hole. Seat back was easy top install. Bottom fairly easy but you just have to figure out how to use the slots underneath and tie them off. 2 hours install. Look great. Glad I purchased.

03/25/2018 4:03 pm

Seat covers look fantastic!!!
Just started to install yellow/black/white w/ black piping on my 2018 daytona yellow ICON series. Some type of instructions would be nice. Top seat back was easy. The seat bottoms have 4 strings and its like "Okay, do these tie to some thing or together"? Go fish. They look great and change the entire look of the slingshot. High recommended. the only other issue: I requested no factory logos on the seats. Apparently no one can follow directions because my seats have 4 BRP logos on them. What part of NO THANKS don't they understand?

**SlingMods Response** Hello Mellow, thanks for the review. There are two PRP logo locations on the Seats. The logo up top can be removed, however the logo on the lower portion of the seat can not be removed per the MFG. Sorry for any confusion on this.