Plug N' Play LED Replacement Headlight Assembly with DRL & Turn Signal Integration for the Can-Am Ryker (Set of 2)

Highly visible - increases safety and looks cooler too.
These LED lights are the closest to Legal Lumens max limits for CA and are inside Federal standards. The positioning of the Turn signal feature is highly visible from the front and side.

Huge Improvement Very Impressed
I actually split this install into 2 days for the sake of time and overall took about 3 - 4 hours total with the wire harness then the lights. Scale of 1-10 on the install would be around a 7 and I'm fairly handy. I did have to do a work around on the wireharness that wasn't in the video but I made it work. Also, attatch the wire to the splitter connection before attempting to run it through the fender. Dont just try and put the connector through then connect the wire like was shown in the video. The rest of video was fine. So, the lights. The output is more than double from the yellow halogen and is way more than the single led replacements and these are focused. The integrated turn signals definitely make your intentions known more to on coming traffic. Overall huge improvement and very impressed. You won't go wrong with these lights, they do cost alot but imo were worth it and even prove the look as well as function.

Blown Away
The install took me 30 mins. Just follow the video. Night and day difference. I had the upgraded light bulbs installed. These are even better! Great job!

Outcome: 5/5, Installation: 3/5, Install: 2.5 hours
I am very pleased with these lights. They give the Ryker a very aggressive look and I have received nothing but compliments on the upgrade. The installation was a bit of a pain, primarily because of the location of the bolts on the fender and the confusion involving the 1:2 wiring harness.

Note: You do NOT need to use all components of the 1:2 harness for this install. Dont get hung up trying to figure this out.